App-Einstellungen:
Bitte warten...
Sie sind nicht angemeldet. Sie können ggf. mehr Inhalt sehen, wenn Sie angemeldet sind. Klicken Sie auf Anmelden oder auf Registrieren, wenn Sie noch keine Zugangsdaten haben.
THE RELATIONSHIP BETWEEN THE TENSILE PROPERTIES OF NATURAL FIBRES AND THEIR UD COMPOSITES
Kevin Hendrickx (KU Leuven) Delphine Depuydt (KU Leuven) Aart Van Vuure (KU Leuven) Jan Ivens (KU Leuven)
A method is presented to significantly reduce the amount of samples for single fibre testing. Futhermore, the relationship between single fibre tensile properties and the composite behavior was investigated using this novel testing method.
USING PAPER AS REINFORCEMENT MATERIAL IN THERMOPLASTIC COMPOSITES: LAMINATE FABRICATION AND CHARACTERIZATION
Martina Prambauer (Transfercenter für Kunststofftechnik GmbH) Christian Paulik (Johannes Kepler University Linz) Christoph Burgstaller (Transfercenter für Kunststofftechnik GmbH)
Cellulose based paper sheets were used as a sustainable reinforcement material to produce thermoplastic composites. A suitable mechanical property profile was obtained making paper an interesting alternative reinforcement for thermoplastic laminates.
MULTI-DIE VACUUM ASSISTED PULTRUSION OF FLAX/PLA THERMOPLASTIC BIOCOMPOSITE ROD
Arnold Oswald (Ecole Polytechnique Montréal) Felix Lapointe (Polytechnique Montreal) Louis Laberge Lebel (Ecole Polytechnique Montréal)
This study reports the pultrusion of Flax/PLA thermoplastic biocomposite rods. A modular pultrusion line was built to enable different die configurations and implement a vacuum chamber. Effect of temperature, die configuration and vacuum were studied.
A STUDY ON FATIGUE BEHAVIOR OF NANOINTERLEAVED WOVEN CFRP
Tommaso Brugo (University of Bologna) Giangiacomo Minak (University of Bologna) Andrea Zucchelli (University of Bologna) Xiu Yan (University of Strathclyde) Hamed Saghafi (Amirkabir University of Technology) Mohamad Fotouhi (Amirkabir University of Technology) Roberto Palazzetti (University of StrathClyde)
DCB virgin and nanomodified CFRP were tested and compared. Static tests showed nanomodified specimens 130% stronger. Crack grow ratio chart showed that nanomodified specimen can sustain a 85%higher load and that fracture propagates 30 times slower.
CARBON NANO-INK COATED OPEN CELL POLYURETHANE FOAM WITH MULTILAYERED SKELETON FOR DAMPING APPLICATIONS
Xiao-Chong Zhang (University of Bristol) Fabrizio Scarpa (University of Bristol) Ronan McHale (Thomas Swan & Co. Ltd.) Andrew Limmack (University of Bristol) Hua-Xin Peng (Zhejiang University)
CNT-CNT sliding mechanism was utilised to create frictional energy dissipation in high density nano-filler regions to improve damping performance of an open cell foam through multilayered nano-inks coatings on foam skeleton.
CREEP BEHAVIOUR OF PP/CNT NANOCOMPOSITES: AN EXPERIMENTAL STUDY VALIDATED WITH CREEP MODEL
Deniz Ürk (İstanbul Technical University) Abdullah Dönmez (Istanbul Technical University) Didem Ovalı (Istanbul Technical University) Şenol Ataoğlu (Istanbul Technical University) Aytaç Arıkoğlu (Istanbul Technical University) M.Lütfi Öveçoğlu (Istanbul Technical University) Hülya Cebeci (Istanbul Technical University)
The creep-recovery behaviour of isotactic polypropylene-multi wall carbon nanotubes (PP/CNT) nanocomposites has been studied with long-term tensile test at dynamic mechanical analysis.
DEVELOPMENT OF GRAPHENE NANOPLATELETS REINFORCED ALUMINIUM MATRIX NANOCOMPOSITES BY A COMBINATION OF SEMI-SOLID STIRRING AND ULTRASONIC TREATMENT
Sinan Kandemir (İZMİR INSTITUTE OF TECHNOLOGY) Yücel Aydoğan (İZMİR INSTITUTE OF TECHNOLOGY)
The aim of this study is to disperse graphene nanoplatelets (GNPs) into liquid aluminium. 0.5 wt.% GNPs were first incorporated into aluminium alloy under semi-solid stirring, and then the composite was ultrasonically treated in molten alloy.
DEVELOPMENT OF NANOSTRUCTURED ALUMINA-BASED METAL MATRIX FUNCTIONALLY GRADED COMPOSITE COATINGS
Gobinda Saha (University of New Brunswick) Mohsen Mohammadi (University of New Brunswick)
This research paper present the experimental results obtained from high-energy mechanical alloying of nanocrystalline alumina-nickel(chrome) composite cermet under a set of design of experiments, followed by thermal spraying of the feedstock.
DEVELOPMENT OF UNTWISTED CARBON NANOTUBE YARN WITH HIGH STRENGTH BY HEAT TREATMENT
Taesung Kim (Waseda University) Hidefumi Nikawa (HONDA R&D) Atsushi Hosoi (Waseda University) Hiroyuki Kawada (Waseda University)
Untwisted carbon nanotube yarns were fabricated by the dry spinning method using a die and graphitized in order to develop CNT yarns with high strength and stiffness.
EFFECT OF INFRARED LASER IRRADIATION ON THE PIEZOELECTRIC PROPERTIES OF THE TIO2 COATED MWCNT REINFORCED PVDF FILM
Da Hye Kim (JBNU) Kun Jeong (Chonbuk National University) Seong Su Kim (Chonbuk National University)
In this work, MWCNTs were coated with anatase TiO2 nanoparticles by hydrothermal process and Infrared radiation was applied to TiO2 coated MWCNT/PVDF solution to enhance the interaction between the TiO2 coated MWCNT nanoparticles and F atoms of PVDF.
Wir verwenden Tools, um das Verhalten unserer Benutzer zu analysieren und unsere Website zu optimieren. Sie können dem jederzeit in den Cookie Einstellungen widersprechen.
